Dmesg from Raspberry Pi

Standard

Sadly could not get it to work with the video cable I had, so work colleagues will have to wait to see this thing put through its paces, but it boots headless.

[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.9+ (dc4@dc4-arm-01) (gcc version 4.5.1 (Broadcom-2708) ) #168 PREEMPT Sat Jul 14 18:56:31 BST 2012
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 49152
[ 0.000000] free_area_init_node: node 0, pgdat c05f7c4c, node_mem_map c06c8000
[ 0.000000] Normal zone: 384 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 48768 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48768
[ 0.000000] Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0x2 bcm2708.serial=0x5321aa64 smsc95xx.macaddr=B8:27:EB:21:AA:64 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 192MB = 192MB total
[ 0.000000] Memory: 187880k/187880k available, 8728k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 – 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 – 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xcc800000 – 0xd8000000 ( 184 MB)
[ 0.000000] lowmem : 0xc0000000 – 0xcc000000 ( 192 MB)
[ 0.000000] modules : 0xbf000000 – 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 – 0xc05943d0 (5681 kB)
[ 0.000000] .init : 0xc0595000 – 0xc05c7000 ( 200 kB)
[ 0.000000] .data : 0xc05c8000 – 0xc05f93b8 ( 197 kB)
[ 0.000000] .bss : 0xc05f93dc – 0xc06c7504 ( 825 kB)
[ 0.000000] NR_IRQS:245
[ 0.000000] timer_set_mode: unhandled mode:1
[ 0.000000] timer_set_mode: unhandled mode:3
[ 0.000000] Console: colour dummy device 80×30
[ 0.000000] console [tty1] enabled
[ 3.008944] Calibrating delay loop… 697.95 BogoMIPS (lpj=3489792)
[ 3.067898] pid_max: default: 32768 minimum: 301
[ 3.068528] Mount-cache hash table entries: 512
[ 3.069184] Initializing cgroup subsys cpuacct
[ 3.069298] Initializing cgroup subsys devices
[ 3.069349] Initializing cgroup subsys freezer
[ 3.069394] Initializing cgroup subsys blkio
[ 3.069512] CPU: Testing write buffer coherency: ok
[ 3.069646] ftrace: allocating 14801 entries in 44 pages
[ 3.142643] hw perfevents: enabled with v6 PMU driver, 3 counters available
[ 3.144629] devtmpfs: initialized
[ 3.152379] NET: Registered protocol family 16
[ 3.154308] vc-mem: mm_vc_mem_phys_addr = 0x00000000
[ 3.154373] vc-mem: mm_vc_mem_size = 0x10000000 (256 MiB)
[ 3.154891] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 3.154964] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 3.155013] mailbox: Broadcom VideoCore Mailbox driver
[ 3.155125] bcm2708_vcio: mailbox at f200b880
[ 3.155233] bcm_power: Broadcom power driver
[ 3.155281] bcm_power_open() -> 0
[ 3.155314] bcm_power_request(0, 8)
[ 3.656009] bcm_mailbox_read -> 00000080, 0
[ 3.656055] bcm_power_request -> 0
[ 3.656088] Serial: AMBA PL011 UART driver
[ 3.656281] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 3.961991] console [ttyAMA0] enabled
[ 3.987793] bio: create slab at 0
[ 3.993362] SCSI subsystem initialized
[ 3.997412] usbcore: registered new interface driver usbfs
[ 4.003206] usbcore: registered new interface driver hub
[ 4.008839] usbcore: registered new device driver usb
[ 4.014995] Switching to clocksource stc
[ 4.024054] Switched to NOHz mode on CPU #0
[ 4.037751] FS-Cache: Loaded
[ 4.041143] CacheFiles: Loaded
[ 4.062678] NET: Registered protocol family 2
[ 4.067628] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 4.076225] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 4.083753] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 4.090454] TCP: Hash tables configured (established 8192 bind 8192)
[ 4.096838] TCP reno registered
[ 4.100049] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 4.105942] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 4.112808] NET: Registered protocol family 1
[ 4.118168] RPC: Registered named UNIX socket transport module.
[ 4.124352] RPC: Registered udp transport module.
[ 4.129129] RPC: Registered tcp transport module.
[ 4.133858] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.140699] bcm2708_dma: DMA manager at cc808000
[ 4.145463] bcm2708_gpio: bcm2708_gpio_probe c05d00e0
[ 4.151132] vc-mem: Videocore memory driver
[ 4.156232] audit: initializing netlink socket (disabled)
[ 4.161794] type=2000 audit(0.780:1): initialized
[ 4.273943] VFS: Disk quotas dquot_6.5.2
[ 4.278154] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.286181] FS-Cache: Netfs ‘nfs’ registered for caching
[ 4.292889] msgmni has been set to 366
[ 4.299441] io scheduler noop registered
[ 4.303417] io scheduler deadline registered (default)
[ 4.308775] io scheduler cfq registered
[ 4.313091] BCM2708FB: registering framebuffer (656×416@16)
[ 4.319455] bcm2708_fb_set_par info(cb8ec400) 656×416 (656×416), 0, 16
[ 4.324300] BCM2708FB: start = cc900000,4d385000 width=656, height=416, bpp=16, pitch=1312 size=545792 success=0
[ 4.328226] Console: switching to colour frame buffer device 82×26
[ 4.363081] BCM2708FB: register framebuffer (0)
[ 4.370756] kgdb: Registered I/O driver kgdboc.
[ 4.389840] brd: module loaded
[ 4.401655] loop: module loaded
[ 4.408070] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
[ 4.417984] vcos: [1]: vchiq_init_state: called
[ 4.425920] vcos: [1]: vchiq: initialised – version 2 (min 2), device 253.0
[ 4.436157] usbcore: registered new interface driver smsc95xx
[ 4.444401] cdc_ncm: 04-Aug-2011
[ 4.450190] usbcore: registered new interface driver cdc_ncm
[ 4.458183] dwc_otg: version 2.90b 6-MAY-2010 (platform bus)
[ 4.466607] Core Release: 2.80a
[ 4.472190] Setting default values for core params
[ 4.479410] Finished setting default values for core params
[ 4.487660] cc840008 -> 1
[ 4.692730] Using Buffer DMA mode
[ 4.698348] Periodic Transfer Interrupt Enhancement – disabled
[ 4.706568] Multiprocessor Interrupt Enhancement – disabled
[ 4.714606] dwc_otg bcm2708_usb: DWC OTG Controller
[ 4.722035] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 4.731718] dwc_otg bcm2708_usb: irq 75, io mem 0x00000000
[ 4.739565] Init: Port Power? op_state=1
[ 4.745661] Init: Power Port (0)
[ 4.751275] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.760478] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.770048] usb usb1: Product: DWC OTG Controller
[ 4.776999] usb usb1: Manufacturer: Linux 3.1.9+ dwc_otg_hcd
[ 4.784974] usb usb1: SerialNumber: bcm2708_usb
[ 4.792912] hub 1-0:1.0: USB hub found
[ 4.798875] hub 1-0:1.0: 1 port detected
[ 4.805829] Module dwc_common_port init
[ 4.806233] usbcore: registered new interface driver uas
[ 4.813839] Initializing USB Mass Storage driver…
[ 4.821204] usbcore: registered new interface driver usb-storage
[ 4.829462] USB Mass Storage support registered.
[ 4.836535] usbcore: registered new interface driver libusual
[ 4.845075] mousedev: PS/2 mouse device common for all mice
[ 4.853041] cpuidle: using governor ladder
[ 4.859428] cpuidle: using governor menu
[ 4.865595] sdhci: Secure Digital Host Controller Interface driver
[ 4.874016] sdhci: Copyright(c) Pierre Ossman
[ 4.880758] bcm_power_open() -> 1
[ 4.886491] Registered led device: mmc0::
[ 4.887001] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform’s DMA
[ 4.899412] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 4.907624] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.915932] Registered led device: led0
[ 4.916420] usbcore: registered new interface driver usbhid
[ 4.925516] usbhid: USB HID core driver
[ 4.933397] TCP cubic registered
[ 4.938859] Initializing XFRM netlink socket
[ 4.945587] NET: Registered protocol family 17
[ 4.954648] Registering the dns_resolver key type
[ 4.967050] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 4.989569] Waiting for root device /dev/mmcblk0p2…
[ 5.022690] mmc0: problem reading SD Status register.
[ 5.047824] mmc0: new high speed SDHC card at address 0215
[ 5.069785] mmcblk0: mmc0:0215 APPSD 30.6 GiB
[ 5.078236] mmcblk0: p1 p2
[ 5.209561] usb 1-1: new high speed USB device number 2 using dwc_otg
[ 5.439438] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 5.448581] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.459482] hub 1-1:1.0: USB hub found
[ 5.465852] hub 1-1:1.0: 3 ports detected
[ 5.749161] usb 1-1.1: new high speed USB device number 3 using dwc_otg
[ 5.869564] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 5.879263] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.892256] smsc95xx v1.0.4
[ 5.954590] smsc95xx 1-1.1:1.0: eth0: register ‘smsc95xx’ at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:21:aa:64
[ 10.705547] EXT4-fs (mmcblk0p2): recovery complete
[ 10.715781] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.729063] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 10.738931] Freeing init memory: 200K
[ 24.983111] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 25.326722] ### snd_bcm2835_alsa_probe c05d07a0 ############### PROBING FOR bcm2835 ALSA device (0):(1) ###############
[ 25.349304] Creating card…
[ 25.354678] Creating device/chip ..
[ 25.369822] Adding controls ..
[ 25.375202] Registering card ….
[ 25.396456] bcm2835 ALSA CARD CREATED!
[ 25.408425] ### BCM2835 ALSA driver init OK ###
[ 32.799926] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 38.998740] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SS